Peugeot 307 LED Headlight & Fog Light Kits
Facelift 2005–2008 · standard halogen headlights
✓ Choose your kit or bulbs
Bulb positions
2005 was the changeover year between the earlier 307 (2001–2005) and the facelift, so a 2005 car can have either headlight. Check the codes on your old bulbs, or send us your reg, before ordering. These kits are for the facelift only. The earlier 307 uses different bulbs, including H1 fogs instead of H11, so our facelift kits don't suit it. Not for factory xenon headlights.
Fitting
- The 307 headlight holds each bulb with a spring clip. Check the LED collar sits flat and is held firmly by the original clip before refitting the dust cover.
- We're still confirming that the collar on our LED bulbs fits the 307's original clip. If it doesn't seat securely, don't force it. Contact us and we'll advise on a holder.
- Make sure the dust cover closes fully over the back of the LED and the cable isn't pinched.
- Test every bulb with the engine running and check for dash warnings.
Beam alignment
- Turn each LED to the position shown in the bulb's own fitting instructions.
- Set the headlight levelling dial to 0 with the car unloaded.
- Check the beam pattern and cut-off against a wall, then have the aim checked by a garage.
CANBUS ready
- Our bulbs are built to work with most car warning systems.
- Some cars may still show a bulb warning or flicker and need a canceller (about €10 a pair). We can't guarantee there will be no dashboard warnings.
LED bulbs are an aftermarket upgrade, not an original halogen replacement. Whether your car is roadworthy and passes the NCT depends on the bulbs having appropriate type approval, being compatible with your car, being fitted correctly and having the beam aligned correctly. We can't guarantee an NCT result.
← All Peugeot models